Titan™
Liner Hanger System
Atlas™
Liner Hanger System
Resurrection™
Re-Frac System
TITAN™ & ATLAS™ LINER HANGER SYSTEMS
Anchoring the foundation of every lateral — Frontier’s liner hanger systems are purpose-built for reliable casing support in today’s most challenging extended-reach, high-pressure wells. Our mechanical and hydraulic systems are designed for clean runs, dependable setting, and secure pack-off — giving operators confidence from the bottom up.
Whether navigating high-angle wells, heavy casing strings, or tight landing zones, Frontier systems are built to run clean, set strong, and hold tight — every time.
Titan™ Liner Hanger System
Engineered for high-performance wellbore isolation, the Titan™
system offers both hydraulic and mechanical liner hanger options for maximum
operational flexibility. Designed with a bonded liner packer element, it
supports high trip-in speeds and sets reliably with applied setting forces. The
system is available in standard and HPHT configurations, with or without
hold-down slips, and can be manufactured from a wide range of elastomers (NBR,
HNBR, Alfas, Viton) and metallurgy grades (L-80, P-110, C-110, Q-125, or custom
alloys).
Atlas™ Liner Hanger System
The Atlas™ hydraulic liner hanger system features a robust one-piece packer element that performs exceptionally well in challenging wellbores, including rough or eccentric casing environments. Ideal for geothermal and other demanding applications, Atlas™ delivers dependable sealing performance with or without hold-down slips. Available in various elastomer and metallurgical options to meet diverse well conditions.
Resurrection™ Re-Frac System
Bringing new life to old wells – The Resurrection™ System combines Frontier’s proven liner hanger technology with custom-built 3.5″ and 4″ Recedó™ Re-Frac Plugs. Engineered specifically for second-life frac jobs, this system ensures a secure anchor, reliable isolation, and clean intervention access for maximum recovery from legacy wellbores.
- Optimized for re-frac environments with limited casing ID
- Compatible with our compact mechanical or hydraulic liner hangers
- Integrated with Recedó™ re-frac plug designs for short-length, HPHT reliability
- Ideal for operators pursuing re-frac programs in the Permian, Eagle Ford, and DJ Basin
- Built with intention. Named with purpose.
Configurations
– Titan™ Liner Hanger System
– Titan Hydraulic
– Titan Mechanical
– Atlas™ Liner Hanger System
– Atlas Hydraulic
– Resurrection™ Re-Frac System
– 4.0” Resurrection System
– 3.5” Resurrection System
– Accessories
Technical Data Sheet (TDS) Available Upon Request
Detailed specifications and available configurations for this liner hanger system are provided in our Technical Data Sheet. Please contact us to receive the full documentation.
Need More Information?
Reach out to our sales team at sales@frontieroiltools.com to request a TDS or discuss your project requirements.
F1 Liner Hanger Packer 4 ½ x 7 – API 19LH V1
F1 Rotating Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 5 x 7
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 7 x 9.625 With Hold Down Slip
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 7 x 9.625
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
LTSeries Compression Set Packer
4.5 x 7
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer is run with the SureSet Liner Hanger therefore has no hold-down Slip.
SureSet Mechanical Liner Hanger
4.5 x 7
The SureSet is a Mechanical Set Liner Hanger. The Hanger has Bi-Directional Slip for lighter hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner down hole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
3.5 & 4 x 5.5
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
5.5 x 7
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 7.625 x 9.625
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 7.625 x 10.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 8.625 x 10.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
9.625 x 12.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 9.625 x 13.375
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
3.5 & 4 x 5.5
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Mechanical Liner Hanger
3.5 & 4 x 5.5
The Perma Flex Liner Hanger is a Mechanical Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
5.5 x7
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
7.625 x 9.625
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
7.625 x 10.750
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
8.625 x 10.750
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
Frontier PermaFlex Hydraulic Liner Hanger
9.625 x 12.750
The PermaFlex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
9.625 x 13.375
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
Permanent Casing Packer 5.5 x 7
The Permanent Casing Packer is designed to isolate the casing from lower horizontal zones whether it be bad casing below, open hole or other applications. A major feature of the slimline design is the benefit of being able to run standard artificial lift equipment through the ID rather than having to size down equipment or require the standard equipment to be set higher in the wellbore, reducing efficiencies and/or production rate.
Tie Back Receptacle (TBR)
Frontier Drop Off Mandrel
The Drop Off Mandrel is device that allows equipment to ran in hole and released and left down hole without the requirement of Liner Hanger Packer in Cemented & Non-Cemented Applications. The Drop Off Mandrel can be Rotated to bottom if required & accommodate Tie Back Receptacle of varying lengths to allow the connection of Upper Productions String when required.
Drop Off Mandrel & Tie Back Receptacle
The Drop Off Mandrel is device that allows equipment to ran in hole and released and left down hole without the requirement of Liner Hanger Packer in Cemented & Non-Cemented Applications. The Drop Off Mandrel can be Rotated to bottom if required & accommodate Tie Back Receptacle of varying lengths to allow the connection of Upper Productions String when required.
Ball Landing Collar
Ball Seat Landing Collar is a component used when running hydraulic set Liner Hangers. The Landing collar is installed near the bottom of the liner string. This tool allows for the landing of a ball to hydraulically actuate up-hole tools. The landing collar also has a profile to stop and latch the liner wiper plug during the primary cementing operation, and a mating clutch design that prevents rotation during liner drill-out.
Drill Pipe Wiper Dart
Drill Pipe Wiper Plug (DWP) is a rubber wiping device used in liner hanger applications. Dropped from the surface, the DWP provides a means of separation between cement and displacement fluid (drilling mud) preventing cross-contamination during liner cementation. It also serves to wipe the internal diameter (ID) of the drill pipe to prevent sheathing or sticking of cement to the inside of the drill pipe.
Liner Wiper Plug
The Liner Plug (LWP) is a rubber wiping device used in liner hanger applications. Attached to the end of the liner hanger running tool, the LWP is launched upon recipe of the drill pipe wiper plug. The plug assembly provides a mean of septation between the cement and the displacement fluid (drilling mud), preventing cross contamination during liner cementation. It is also serves to wipe the inner diameter (ID) of the liner pipe to prevent sheathing or sticking of hardened cement to the inside of the liner.
Liner Shoe
Liner Shoes are designed to work in horizontal, vertical, and deviated wells, and they use a spring-loaded ball-type valve to prevent backflow into the liner. The Liner Shoe is equipped with set down prongs that prevent rotation of the nose. The shoe is available threaded or a weld-on unit.
Top Drive Cement Head
The Top Drive Cementing Head is designed specifically for cementing liners when a top drive system is employed on the drilling rig. The manifold consists of a swivel, plug drop assembly, ball drop assembly, plug indicator sub and a fluid bypass manifold.