Cemented Liner
Hanger Systems
Uncemented Liner
Top Packers
Remedial &
ReFrac Liners
F1 Liner Hanger Packer 4 ½ x 7 – API 19LH V1
F1 Rotating Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 5 x 7
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 7 x 9.625 With Hold Down Slip
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
F1 Rotating High Capacity Liner Hanger Packer 7 x 9.625
F1 Rotating High Capacity Liner Hanger-Packer utilizes multiple sets of constrained slips to enable increased load rating. Constrained slips also allow for rotation while running the liner downhole, and are held firmly to the cone preventing slip damage.
LTSeries Compression Set Packer
4.5 x 7
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer is run with the SureSet Liner Hanger therefore has no hold-down Slip.
SureSet Mechanical Liner Hanger
4.5 x 7
The SureSet is a Mechanical Set Liner Hanger. The Hanger has Bi-Directional Slip for lighter hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner down hole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
3.5 & 4 x 5.5
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
5.5 x 7
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 7.625 x 9.625
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 7.625 x 10.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 8.625 x 10.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer
9.625 x 12.750
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
LTSeries Liner Top Packer 9.625 x 13.375
The LTSeries Liner Top Packer is a compression set Liner Top Packer, which has multiple TBR lengths available to allow for Floating Tie Back Seal Assembly to accommodate tubing movement during Frac or Production. The Packer utilizes hold-down Slip to keep Packer Anchored. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
3.5 & 4 x 5.5
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Mechanical Liner Hanger
3.5 & 4 x 5.5
The Perma Flex Liner Hanger is a Mechanical Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
5.5 x7
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
7.625 x 9.625
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
7.625 x 10.750
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
8.625 x 10.750
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
Frontier PermaFlex Hydraulic Liner Hanger
9.625 x 12.750
The PermaFlex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
PermaFlex Hydraulic Liner Hanger
9.625 x 13.375
The Perma Flex Liner Hanger is a Hydraulic Set Liner Hanger. The Hanger has Multiple Slip sets that allow for higher hanging loads to be suspended without causing casing damage. Constrained Slips also allow for rotation while running the liner downhole and are held firmly to the cone preventing slip damage.
Permanent Casing Packer 5.5 x 7
The Permanent Casing Packer is designed to isolate the casing from lower horizontal zones whether it be bad casing below, open hole or other applications. A major feature of the slimline design is the benefit of being able to run standard artificial lift equipment through the ID rather than having to size down equipment or require the standard equipment to be set higher in the wellbore, reducing efficiencies and/or production rate.
Tie Back Receptacle
Frontier Drop Off Mandrel
The Drop Off Mandrel is device that allows equipment to ran in hole and released and left down hole without the requirement of Liner Hanger Packer in Cemented & Non-Cemented Applications. The Drop Off Mandrel can be Rotated to bottom if required & accommodate Tie Back Receptacle of varying lengths to allow the connection of Upper Productions String when required.
Drop Off Mandrel & Tie Back Receptacle
The Drop Off Mandrel is device that allows equipment to ran in hole and released and left down hole without the requirement of Liner Hanger Packer in Cemented & Non-Cemented Applications. The Drop Off Mandrel can be Rotated to bottom if required & accommodate Tie Back Receptacle of varying lengths to allow the connection of Upper Productions String when required.
Ball Landing Collar
Ball Seat Landing Collar is a component used when running hydraulic set Liner Hangers. The Landing collar is installed near the bottom of the liner string. This tool allows for the landing of a ball to hydraulically actuate up-hole tools. The landing collar also has a profile to stop and latch the liner wiper plug during the primary cementing operation, and a mating clutch design that prevents rotation during liner drill-out.
Drill Pipe Wiper Dart
Drill Pipe Wiper Plug (DWP) is a rubber wiping device used in liner hanger applications. Dropped from the surface, the DWP provides a means of separation between cement and displacement fluid (drilling mud) preventing cross-contamination during liner cementation. It also serves to wipe the internal diameter (ID) of the drill pipe to prevent sheathing or sticking of cement to the inside of the drill pipe.
Liner Wiper Plug
The Liner Plug (LWP) is a rubber wiping device used in liner hanger applications. Attached to the end of the liner hanger running tool, the LWP is launched upon recipe of the drill pipe wiper plug. The plug assembly provides a mean of septation between the cement and the displacement fluid (drilling mud), preventing cross contamination during liner cementation. It is also serves to wipe the inner diameter (ID) of the liner pipe to prevent sheathing or sticking of hardened cement to the inside of the liner.
Liner Shoe
Liner Shoes are designed to work in horizontal, vertical, and deviated wells, and they use a spring-loaded ball-type valve to prevent backflow into the liner. The Liner Shoe is equipped with set down prongs that prevent rotation of the nose. The shoe is available threaded or a weld-on unit.
Top Drive Cement Head
The Top Drive Cementing Head is designed specifically for cementing liners when a top drive system is employed on the drilling rig. The manifold consists of a swivel, plug drop assembly, ball drop assembly, plug indicator sub and a fluid bypass manifold.